It happens to everyone: a guest asks for the Wi-Fi password, or a new phone needs connecting, and the password you set years ago is gone from memory. The good news is that any device which has already joined the network has the password saved, and each operating system gives you a way to read it back. You do not need to reset the router or call your provider.
Work through the methods below in order of convenience. A Windows PC or Mac that is already connected is usually the fastest route. A phone works too. And if no connected device is available, the router itself — its printed label or its settings page — always has the answer. One caution before you start: only do this on your own network or one you have permission to use, and think twice before sharing the password onward.
Find the Wi-Fi password on Windows
On a Windows PC that is connected to the network right now, Microsoft documents this route:
- Open Settings and select Network & internet.
- Select your connected Wi-Fi network's Properties.
- Next to Wi-Fi network password, select Show. Confirm with your Windows password or PIN if asked, and the password appears, along with a QR code another device can scan.
For a network the PC joined in the past but is not connected to now, use Command Prompt as an administrator: run netsh wlan show profiles to list saved networks, then netsh wlan show profile name="NetworkName" key=clear and read the password on the Key Content line. You can also find saved networks under Settings > Network & internet > Wi-Fi > Manage known networks, then select a network and choose Show next to its password.
Find the Wi-Fi password on a Mac
macOS stores Wi-Fi passwords in the keychain, and the Passwords app (or Keychain Access on older versions) can reveal them:
- Open the Passwords app from Launchpad or Spotlight. On older macOS versions, open Keychain Access instead.
- Select the Wi-Fi category (in Keychain Access, search for the network name under System or login keychains).
- Double-click the network, tick Show password (Keychain Access) or tap the password field (Passwords app), and authenticate with your Mac password or Touch ID.
The Mac must have joined that network at some point — a network it has never connected to will not be in the list.
Find or share the Wi-Fi password on Android and iPhone
Android: Most Android phones let you share the current network with a QR code, which is often all a guest needs. Go to Settings > Network & internet > Internet, tap the connected network, then tap Share and unlock with your PIN or fingerprint. The screen shows a QR code, and on many phones the plain-text password appears underneath it. A guest can scan the code with their camera to join without typing anything.
iPhone: Open Settings > Wi-Fi, tap the (i) icon next to the connected network, tap the Password field, and authenticate with Face ID, Touch ID or your passcode to reveal it. The same screen in the Passwords app lists Wi-Fi networks you have joined before. And if your guest also uses an iPhone or Mac signed in to iCloud, simply bringing their device near yours while you are connected usually triggers a "Share Password" prompt — no typing at all.
Get the password from the router label or admin page
If the password was never changed from the factory default, it is printed on a sticker on the router itself — look for Wi-Fi password, Network key or WPA key next to the default network name (SSID). This is also the password the network returns to if the router is ever factory-reset.
If the password was changed, read it from the router's settings:
- Connect a computer to the router (Wi-Fi or cable) and open its admin page — the address is your Default Gateway, commonly
192.168.0.1or192.168.1.1. - Sign in with the admin username and password (also often on the sticker, unless you changed them).
- Open the Wireless or Wi-Fi settings section. The current password is shown in a field labelled Password, Passphrase or Pre-shared key — tick "show" if it is hidden behind dots.
If none of the methods work
If no device remembers the network and the router admin password is also lost, the remaining option is a factory reset of the router using the small reset button (usually held for about 10 seconds). Afterwards the network returns to the name and password printed on the label, and you will need to reconnect every device and set the router up again. Treat it as a last resort, and note the reset also removes any custom settings such as port forwarding or a separate guest network.
Key takeaways
- A connected Windows PC shows the current network's password in Settings > Network & internet > Properties > Show.
netsh wlan show profile name="..." key=clearreveals passwords for networks a Windows PC saved earlier.- Android and iPhone can share the network by QR code from the Wi-Fi settings — often easier than reading the password aloud.
- The router label holds the factory password; the router admin page holds the current one if it was changed.
Quick questions
Can I find the Wi-Fi password for a network I have never joined?
No. Every method in this guide reads a password that a device or the router already knows. There is no legitimate way to reveal the password of a network you were never given access to — you need to ask the network owner.
The password field shows dots and no Show option. What now?
On Windows, use the Command Prompt method with an administrator account — the plain-text key only appears for administrators. On a Mac, you must authenticate with the Mac's login password. If you do not have admin rights on the device (a work laptop, for example), ask whoever manages it, or use the router method instead.
Is it safe to share my Wi-Fi password with guests?
It gives them access to your local network, not just the internet. For visitors you do not know well, most routers offer a guest network with its own password that keeps your own devices separate — worth setting up once, and you can change the guest password freely afterwards.
I changed the password. Why did everything disconnect?
That is expected: every device still holds the old password. Reconnect each device with the new one, or use the QR share feature from a device you have already reconnected to make it quicker.
Further reading: Connect to a Wi-Fi network in Windows — “Find your Wi-Fi network password in Windows” — Microsoft Support.