Every rechargeable battery wears out. A phone or laptop that once lasted the day slowly becomes one that begs for a charger by afternoon — and the operating system knows exactly how far the wear has gone, if you know where it keeps the measurement. That measurement is battery health: how much charge the battery can hold now, compared with when it was new.

The three platforms in this guide report it very differently. The iPhone shows a clear percentage in Settings. Android depends on the brand — some show health directly, others need a different approach. Windows does not show a percentage at all, but its built-in battery report contains the two numbers that matter. Here is each route, and how to read what you find.

iPhone: Maximum Capacity in Settings

  1. Open Settings > Battery.
  2. Tap Battery Health (on iPhone 15 and later) or Battery Health & Charging (iPhone 14 and earlier).
  3. Read Maximum Capacity — the battery's current full-charge capacity as a percentage of its capacity when new. On iPhone 15 and later, the same screen also shows the cycle count, manufacture date and first-use date.
  4. Read the message under Peak Performance Capability: it tells you whether the battery is supporting normal performance, or whether it has degraded enough that a service is recommended.

Apple's guidance is straightforward: the figure is a measure of capacity, not a fault countdown. A battery in the low 80s will still work, but will run noticeably shorter between charges; when the screen says the health is significantly degraded or a replacement is recommended, that is the point where a new battery restores both runtime and, on older models, full performance. The same Battery settings page also shows which apps used the most energy in the last 24 hours and 10 days — worth checking before blaming the battery itself.

Android: it depends on the brand

Android has no single standard health screen, so work through these in order:

  • Pixel phones (recent models): Settings > Battery > Battery health shows the battery's condition and capacity information, and Android's battery settings on recent versions include a health/capacity page — check under Settings > About phone > Battery information on supported devices, which lists capacity and cycle count.
  • Samsung Galaxy: open the Samsung Members app > Support > Phone diagnostics > Battery status, which reports the battery's condition. Samsung's own Device Care screen (Settings > Battery and device care) also flags a battery that needs attention.
  • Dial codes: codes such as *#*#4636#*#* open a testing menu on some Android phones that may include battery information — but availability varies by brand and carrier, many modern phones have removed it, and the figures shown are often just the current charge and temperature, not health. Treat any code you read online as a maybe, not a method.
  • Charge-cycle apps: if your phone shows nothing, an app that reads the system's battery counters can estimate wear from cycle counts and charge history. Prefer well-known apps, and treat their percentage as an estimate — only the manufacturer's own diagnostics read the battery's own records.

Windows laptops: generate the battery report

Windows keeps a full battery history and will write it out as a readable report — this is the most detailed health check of the three platforms:

  1. Open Command Prompt (Start, type cmd, Enter). An ordinary window is fine.
  2. Run: powercfg /batteryreport /output "%USERPROFILE%\Documents\battery-report.html" and press Enter. Windows confirms the report was saved.
  3. Open the file battery-report.html in your Documents folder with any browser.
  4. In the Installed batteries section, compare two numbers: Design Capacity (what the battery held when new) and Full Charge Capacity (what it holds now). Divide the second by the first and multiply by 100 — that percentage is your battery health. For example, 38,000 mWh from an original 48,000 mWh is about 79%.
  5. Scroll further for the Battery capacity history (how the decline happened over time) and Battery life estimates based on your actual usage.

Microsoft's own powercfg documentation describes this report and its options, including /duration to change how many days of usage the report analyses. A desktop PC will produce an empty or near-empty report — it has no battery to measure.

Reading the result: when is a battery “worn out”?

There is no universal pass/fail line, but these guideposts help:

  • Around 90–100%: effectively healthy; short runtime at this level usually means an app or setting, not the battery.
  • Around 80–90%: normal wear for a device a couple of years old. You will feel it on long days, but replacement is a choice, not an emergency.
  • Below roughly 80%, or a “service recommended” message: the battery is significantly degraded. Replacement typically restores the device's original runtime and is far cheaper than replacing the device — get a quote before deciding the whole phone or laptop is finished.
  • Sudden drops, swelling, or the device shutting down at 20–30%: stop relying on percentages — those are signs of a failing battery. A swollen battery (a bulging case or lifting screen) is a safety issue: stop using the device and take it to a service centre rather than charging it unattended.

Whatever the figure, check the per-app usage list before spending money. One misbehaving app can halve a healthy battery's day, and no new battery outruns bad software for long.

Key takeaways

  • iPhone: Settings > Battery > Battery Health shows Maximum Capacity as a percentage, plus cycle count on iPhone 15 and later.
  • Android varies: Pixel and Samsung have health/diagnostic screens; dial codes are unreliable and often removed — treat them as a bonus, not a method.
  • Windows: run powercfg /batteryreport and compare Full Charge Capacity with Design Capacity — that ratio is your health percentage.
  • Below about 80% (or a service message) is replacement territory; swelling or sudden shutdowns mean stop and get it serviced.

Quick questions

Does fast charging damage battery health?

Heat is the battery's main enemy, and fast charging produces more of it, so heavy fast-charge use can contribute to wear over years. In practice, how hot the device gets (gaming while charging, leaving it in the sun) matters at least as much. Features like Optimised Charging, which avoid sitting at 100% for hours, are worth leaving on.

What is a charge cycle, and how many should a battery survive?

One cycle is using the equivalent of 100% of the battery's capacity — two half-days of use add up to one cycle, so cycles accumulate more slowly than days. Phone and laptop batteries are generally designed to keep most of their capacity for hundreds of cycles; the cycle count in your health screen, read alongside the capacity percentage, tells the real story.

My health dropped several percent in a month. Is that normal?

Small jumps are usually the measurement catching up rather than sudden damage — health figures are estimates that the system recalibrates over time, and they can sit unchanged for months then adjust by a few points. A genuinely rapid decline paired with heat, swelling or shutdowns is different: that is a failing battery and should be serviced.

Can battery health be improved or restored?

No — the wear is chemical and permanent, and apps claiming to “repair” a battery cannot change it. Calibration (a full charge, full discharge, full charge) can make the percentage reading more accurate on some devices, but the capacity itself only comes back with a replacement battery.

Further reading: Check the iPhone battery health and usage — Apple Support · Generating a battery report with PowerCfg (battery life estimates and history) — Microsoft Learn.